RE: Wells Gardner 6100 Wavyness, Bouncing

From: Joe <joe_at_joesarcade.com>
Date: Thu Jun 24 2004 - 14:48:52 EDT

If you are using a WG6100 replacement deflection board from arcadeshop then you need to install a WG6100 deflection board wiring harness on the board. Just remove it from a non working board or make a new one. Solder to the exact same points as it would go to on a standard 6100 deflection. Your problems will disappear. This is not a problem with Gravitar/BW/SD. I can't say on Star Wars or MH.
 
JB

________________________________

From: owner-vectorlist@vectorlist.org on behalf of Anthony Pietrak
Sent: Thu 6/24/2004 12:19 PM
To: vectorlist@vectorlist.org
Subject: VECTOR: Wells Gardner 6100 Wavyness, Bouncing

Kind of puzzled with this one, it's a Wells 6100 Color X-Y monitor that we
have running in a Tempest. Picture looks good, but its bouncing a bit (more
than the usual flicker) and I've noticed some wavyness, almost like some
interference.

Monitor has a new HV unit and deflection board from Arcadeshop installed.
The HV cage is intact, we've tried another Tempest board and had the same
issue, so we're pretty certain it is the monitor.

I've installed other HV units in different monitors/games from Arcadeshop
without having this issue. Never installed both the deflection board and HV
unit, but we're trying to bulletproof this as best we can.

Any thoughts?

Anthony

--Anthony Pietrak
www.QuarterArcade.com
Restored Arcade Games for your Home

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Thu Jun 24 14:54:38 2004

This archive was generated by hypermail 2.1.8 : Thu Jun 24 2004 - 16:50:01 EDT