Re: 19V2000 query

Leave them off the deflection board. Replace them with some solid wire
and things will be much happier. Later revisions of the deflection board
(with no real changes to any of the components) designed these resistors
out of the circuit.

tm

Phil Morris wrote:

> I have a 19V2000 and on the deflection board one of the large 3.9 ohm
> 15w wirewound resistors has been removed (or broken off). From reading
> around I see these resistors aren't strictly required (with some
> caveats) - even so, I'd still like to replace the missing one.
>
> Trouble is that the nearest values I can find here in the UK are 3.3 and
> 4.7 ohms - I assume the 3.3 is the most suitable?
>
> If I use 3.3, should I replace the remaining 3.9 with another 3.3 ?
>
> I know, I can order from Bob Roberts in the US, but as I don't need
> anything else it seems a bit long-winded to do this for a resistor. :)
>
>
> Thanks
> Phil
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com
>
>
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Jul 27 10:10:45 2004