RE: TECH: Major Havoc

From: Joe <joe_at_joesarcade.com>
Date: Tue Jan 04 2005 - 15:52:19 EST

Yep, no can do.. Maybe Clay was just mistaken or looking for more repairs :)
 
You can still use your scope on the test points on the board to see the image... Or, pull the X and Y signals from the harness and alligator clip them to the points on the boards. You will get an image.
 
IMHO for your problem, I would most likely start tracing your X and Y back to the outputs from the dac with a scope (actually first opamps.) I think you may find that you have a bad DAC or something broken on the digital side. Tough to say though.. First use your scope.
 
A certain Space Duel board comes to mind that had a similar problem and I believe I found a bad DAC in combination with a LF13201. IIRC of course, that was years ago.
 
JB

________________________________

From: owner-vectorlist@vectorlist.org on behalf of Steve P.
Sent: Tue 1/4/2005 12:13 PM
To: vectorlist@vectorlist.org
Subject: Re: VECTOR: TECH: Major Havoc

Thanks for the reply. I thought that it sounded odd plugging MH into SD w/o
an adapter, thus the post. :)

-Steve P.

----- Original Message -----
From: "Tom McClintock" <tomm@mgcap.com>
To: <vectorlist@vectorlist.org>
Sent: Tuesday, January 04, 2005 12:55 PM
Subject: Re: VECTOR: TECH: Major Havoc

>
>
> Steve P. wrote:
>>
>> Is it possible that the Tempest adapter card might have a bad chip? I
>> know it controls the pincoushining, but is there more to it than that?
>
> The adapter PCBs only do two things as you have noted - remap the pinouts
> and provide pincoushion correction.
>
>
>
>> Also, can I plug the MH PCB into a Space Duel harness w/o the adapter
>> card as a way of testing? I searched Dejanews and Clay Cowgill mentions
>> that you can plug the MH into a SD harness with no ill effect.
>
> Uh, you can take a quick look a thte pinouts for each and see that the
> video outputs on Major Havoc are quite different than either Space Duel or
> Gravitar. So, I would say no to this question.
>
> Here are some details on the conversion PCBs that I cobbeled together
> earlier this year:
> http://www.ionpool.net/arcade/mh/major_havoc_conversion.txt
>
>
>
> tm
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Jan 4 15:56:47 2005

This archive was generated by hypermail 2.1.8 : Wed Jan 05 2005 - 01:50:00 EST