Re: Ballblazer Carts...

A skillfully used blowtorch works well too, but beware the stench. Also be
careful not to overheat. Make sure you do this outside somewhere.

Mark Hooks

----- Original Message -----
From: "Philip" <arcadetraders@btinternet.com>
To: <vectorlist@vectorlist.org>
Sent: Tuesday, February 22, 2005 10:16 AM
Subject: Re: VECTOR: Ballblazer Carts...

>I put the pcb in a vice upside down so the pins are pointing upwards then
> heat the pcb with an electric heat gun. The IC just drops out along with
> most of the other components!
>
> Phil.
> ----- Original Message -----
> From: "James R. Twine" <jtwine@jrtwine.com>
> To: <vectorlist@vectorlist.org>
> Sent: Tuesday, February 22, 2005 2:54 PM
> Subject: RE: VECTOR: Ballblazer Carts...
>
>
>> Anybody got a solder pot (and 5lbs of solder :) they want to
>> give/loan me? It makes pretty short work of desoldering the chips
>> 'cause you can dip the pins into it to quickly melt the solder on them
>> all at once. Keep a grip on the chip and on the cartridge and pull 'em
>> apart...
>>
>> Another way, although not at neat and a little dangerous, is to try
>> to break the PCB right at the centerline of where the pins are. This
>> often leaves solder and small parts of the PCB and/or traces attached to
>> the chip's pins, but you can then heat up each pin and give it a quick
>> bump to knock the stuff off.
>>
>> (Ahhh... the things you do to get at a chip off a scrap board when
>> you are young, poor, and only have a 30 watt soldering iron!)
>>
>> Peace!
>>
>> [Get Delete FXP Files Now! http://www.deletefxpfiles.com]
>> -=- James R. Twine, (spam@jrtwine.com)
>> -----BEGIN GEEK CODE BLOCK-----
>> Version: 3.12
>> GCS d- s+:+ a31 C++++$ UL+++ t+++ 5++ X+++ tv+ z*(+++)
>> b++ DI+++ G++ h++(---) r+++ P+ W+++ N+++ w++++ M-- PS+
>> ------END GEEK CODE BLOCK------
>>
>>
>> > -----Original Message-----
>> > From: Werner Sharp [mailto:wsharp@twcny.rr.com]
>> > Sent: Tuesday, February 22, 2005 9:00 AM
>> > To: vectorlist@vectorlist.org
>> > Subject: Re: VECTOR: Ballblazer Carts...
>> >
>> > I bought a case of these years ago and there's one gotcha with these.
>> > Desoldering a 40 pin chip is a real pain in the *ss. Maybe
>> > I'm just not a
>> > good desolderer but getting all 40 pins free takes a while.
>> > I still have 50
>> > cartridge boards still in a box in the basement with Pokeys attached.
>> >
>> > If you're all going to get a bulk buy together, it would be
>> > nice if one
>> > person with a faster way to desolder them like a solder bath
>> > could help out.
>> >
>> >
>> > ----- Original Message -----
>> > From: "Cris Rhea" <crhea@mayo.edu>
>> > To: <vectorlist@vectorlist.org>
>> > Sent: Tuesday, February 22, 2005 3:00 AM
>> > Subject: Re: VECTOR: Ballblazer Carts...
>> >
>> >
>> > > On Mon, Feb 21, 2005 at 07:48:37PM -0500, Christopher X.
>> > Candreva wrote:
>> > >> On Mon, 21 Feb 2005, Cris Rhea wrote:
>> > >>
>> > >> > What was the going rate per cart??
>> > >>
>> > >> $2.
>> > >>
>> > >> ==========================================================
>> > >> Chris Candreva -- chris@westnet.com -- (914) 967-7816
>> > >> WestNet Internet Services of Westchester
>> > >> http://www.westnet.com/
>> > >>
>> > --------------------------------------------------------------
>> > -------------
>> > >> ** Unsubscribe, subscribe, or view the archives at
>> > >> http://www.vectorlist.org
>> > >> ** Please direct other questions, comments, or problems to
>> > >> chris@westnet.com
>> > >
>> > >
>> > > You can count me in for 10-15.
>> > >
>> > > PayPal OK, yada, yada....
>> > >
>> > > --- Cris
>> > >
>> > >
>> > --------------------------------------------------------------
>> > -------------
>> > > ** Unsubscribe, subscribe, or view the archives at
>> > > http://www.vectorlist.org
>> > > ** Please direct other questions, comments, or problems to
>> > > chris@westnet.com
>> > >
>> >
>> >
>> > --------------------------------------------------------------
>> > -------------
>> > ** Unsubscribe, subscribe, or view the archives at
>> > http://www.vectorlist.org
>> > ** Please direct other questions, comments, or problems to
>> > chris@westnet.com
>> >
>> >
>>
>>
>> --------------------------------------------------------------------------
> -
>> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
>> ** Please direct other questions, comments, or problems to
> chris@westnet.com
>
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Feb 22 10:34:01 2005