Re: G05-802

From: Pinx <pinx.32_at_tesco.net>
Date: Wed Oct 12 2005 - 12:37:12 EDT

Hi,

i got my TIS98's from here and they had plenty :
http://www.dialelec.com/semiconductors-components.html

hope this helps..

Pinx
----- Original Message -----
From: "utahtaper" <utahtaper@comcast.net>
To: <vectorlist@vectorlist.org>
Sent: Saturday, October 08, 2005 1:09 AM
Subject: Re: VECTOR: G05-802

> I've swapped them around and basically I can get the board to run on
> 6-TIS98's installed and using PN3569's for the other 4. But I cannot get
> it
> to run on 4-98's and 6-3569's. When I do, the led strobes. It doesn't work
> on 5-98's and 5-3569's either.
> I'm scratching my head....
>
> ----- Original Message -----
> From: "peter jones" <highwayman2000@mail.ru>
> To: <vectorlist@vectorlist.org>
> Sent: Friday, October 07, 2005 5:10 PM
> Subject: Re: VECTOR: G05-802
>
>
>>
>> -----Original Message-----
>> From: "utahtaper" <utahtaper@comcast.net>
>> To: <vectorlist@vectorlist.org>
>> Date: Fri, 7 Oct 2005 16:45:19 -0600
>> Subject: VECTOR: G05-802
>>
>> > I'm trying to get one going. I have attempted to replace all the
>> > TIS98's
> on the board with various transistors. I have tried TPS98's(These were
> originally there but installed backwards), NTE 159's and PN3569. And non
> of
> them will run it. I have two boards, one works and one doesn't. I have
> removed only all 10 the TIS98's from the good board and installed them on
> the other board and it works. So to explain myself better. Both boards
> will
> work if all ten TIS98's are installed all on either board. The problem is,
> I
> only have enough TIS98's to run one board. So I either need to mix and
> match
> or try to find 10 more TIS98's.
>> > I'm pulling my hair out here. I ordered TIS98's from Bob and he sent me
> the PN3569's and they don't work. And I bought the 159's from a local shop
> and they don't work either. I spent $25 only to find the parts won't work.
>>
>> grab the datasheet here:
>> http://www.ortodoxism.ro/datasheets/MicroElectronics/mXuwxyq.pdf
>>
>> it's just an average npn job, i'd try using an e-line ztx series.
>>
>> --------------------------------------------------------------------------
> -
>> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
>> ** Please direct other questions, comments, or problems to
> chris@westnet.com
>>
>>
>> --
>> No virus found in this incoming message.
>> Checked by AVG Anti-Virus.
>> Version: 7.0.344 / Virus Database: 267.11.13/123 - Release Date:
> 10/06/2005
>>
>>
>
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.344 / Virus Database: 267.11.13/123 - Release Date:
> 10/06/2005
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Wed Oct 12 12:37:13 2005

This archive was generated by hypermail 2.1.8 : Sun Oct 16 2005 - 20:50:01 EDT