Re: 6100 HV transformer in an Amplifone HV PCB

I'll trade two used 6100 transformers for a used Wintron if anyone is
interested. :-) For some reason, I have a handful of 6100 HV cages.

Steven Winslow wrote:
> That's very cool. Only I just had a thought:
>
> Aren't 6100 transformers also very hard to come by? Especially NOS or 100% tested and working? I guess if you have a lot of them laying around this could be very valuable. But you never really see NOS ones available anywhere - do ya?
>
> Steve
>
> -----Original Message-----
>
>> From: simon hanlon <simonjhanlon@btopenworld.com>
>> Sent: Mar 13, 2006 4:45 PM
>> To: vectorlist@vectorlist.org
>> Subject: Re: VECTOR: 6100 HV transformer in an Amplifone HV PCB
>>
>> Here you go, a very rough idea of how to mod the HV board, It was very easy
>> to do. I am amazed it has not been done before now given the silly cost of
>> the Wintron. I chucked this together in a couple of hours just to see if it
>> would run. I will make the mod a lot neater now I know it works. Next thing
>> on the list is to try a few different transformers and find an available
>> Cheap! alternative.
>>
>> http://amplifone-wg6100.mysite.wanadoo-members.co.uk/
>>
>> You may want to run the HV board on the bench first, just make sure that
>> anode cap is well clear! ;)
>>
>>
>> ----- Original Message -----
>> From: "Jess Askey" <jess@askey.org>
>> To: <vectorlist@vectorlist.org>
>> Sent: Monday, March 13, 2006 7:31 PM
>> Subject: Re: VECTOR: 6100 HV transformer in an Amplifone HV PCB
>>
>>
>>
>>> Well, this is exciting.. I have a dead Star Wars Cockpit and several 6100
>>> Transformers laying around. :-)
>>>
>>> I would love a how-to guide. I will try it directly if you get one done.
>>>
>>> jess
>>>
>>>
>>> Wsimon hanlon wrote:
>>>
>>>> Well I just fired it up and it works a treat! would it be a good idea for
>>>> me to write a How to guide and post some pics?
>>>> ----- Original Message ----- From: "peter jones" <highwayman2000@mail.ru>
>>>> To: <vectorlist@vectorlist.org>
>>>> Sent: Monday, March 13, 2006 5:30 PM
>>>> Subject: Re[4]: VECTOR: 6100 HV transformer in an Amplifone HV PCB
>>>>
>>>>
>>>>
>>>>> -----Original Message-----
>>>>> From: "simon hanlon" <simonjhanlon@btopenworld.com>
>>>>> To: <vectorlist@vectorlist.org>
>>>>> Date: Mon, 13 Mar 2006 17:11:09 -0000
>>>>> Subject: Re: Re[2]: VECTOR: 6100 HV transformer in an Amplifone HV PCB
>>>>>
>>>>>
>>>>>> was already wrecked by the previous owner using what looks like an arc
>>>>>> welder to do repairs! ;)
>>>>>>
>>>>> that guy must do a lot of repairs, i'v seen his work many times!!! :(
>>>>>
>>>>> ---------------------------------------------------------------------------
>>>>>
>>>>> ** Unsubscribe, subscribe, or view the archives at
>>>>> http://www.vectorlist.org
>>>>> ** Please direct other questions, comments, or problems to
>>>>> chris@westnet.com
>>>>>
>>>> ---------------------------------------------------------------------------
>>>>
>>>> ** Unsubscribe, subscribe, or view the archives at
>>>> http://www.vectorlist.org
>>>> ** Please direct other questions, comments, or problems to
>>>> chris@westnet.com
>>>>
>>> ---------------------------------------------------------------------------
>>> ** Unsubscribe, subscribe, or view the archives at
>>> http://www.vectorlist.org
>>> ** Please direct other questions, comments, or problems to
>>> chris@westnet.com
>>>
>> ---------------------------------------------------------------------------
>> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
>> ** Please direct other questions, comments, or problems to chris@westnet.com
>>
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to chris@westnet.com
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Mar 13 21:57:30 2006