Re: 6100 HV transformer in an Amplifone HV PCB

That's very cool. Only I just had a thought:

Aren't 6100 transformers also very hard to come by? Especially NOS or 100% tested and working? I guess if you have a lot of them laying around this could be very valuable. But you never really see NOS ones available anywhere - do ya?

Steve

-----Original Message-----
>From: simon hanlon <simonjhanlon@btopenworld.com>
>Sent: Mar 13, 2006 4:45 PM
>To: vectorlist@vectorlist.org
>Subject: Re: VECTOR: 6100 HV transformer in an Amplifone HV PCB
>
>Here you go, a very rough idea of how to mod the HV board, It was very easy
>to do. I am amazed it has not been done before now given the silly cost of
>the Wintron. I chucked this together in a couple of hours just to see if it
>would run. I will make the mod a lot neater now I know it works. Next thing
>on the list is to try a few different transformers and find an available
>Cheap! alternative.
>
>http://amplifone-wg6100.mysite.wanadoo-members.co.uk/
>
>You may want to run the HV board on the bench first, just make sure that
>anode cap is well clear! ;)
>
>
>----- Original Message -----
>From: "Jess Askey" <jess@askey.org>
>To: <vectorlist@vectorlist.org>
>Sent: Monday, March 13, 2006 7:31 PM
>Subject: Re: VECTOR: 6100 HV transformer in an Amplifone HV PCB
>
>
>> Well, this is exciting.. I have a dead Star Wars Cockpit and several 6100
>> Transformers laying around. :-)
>>
>> I would love a how-to guide. I will try it directly if you get one done.
>>
>> jess
>>
>>
>> Wsimon hanlon wrote:
>>> Well I just fired it up and it works a treat! would it be a good idea for
>>> me to write a How to guide and post some pics?
>>> ----- Original Message ----- From: "peter jones" <highwayman2000@mail.ru>
>>> To: <vectorlist@vectorlist.org>
>>> Sent: Monday, March 13, 2006 5:30 PM
>>> Subject: Re[4]: VECTOR: 6100 HV transformer in an Amplifone HV PCB
>>>
>>>
>>>>
>>>> -----Original Message-----
>>>> From: "simon hanlon" <simonjhanlon@btopenworld.com>
>>>> To: <vectorlist@vectorlist.org>
>>>> Date: Mon, 13 Mar 2006 17:11:09 -0000
>>>> Subject: Re: Re[2]: VECTOR: 6100 HV transformer in an Amplifone HV PCB
>>>>
>>>>>
>>>>> was already wrecked by the previous owner using what looks like an arc
>>>>> welder to do repairs! ;)
>>>>
>>>> that guy must do a lot of repairs, i'v seen his work many times!!! :(
>>>>
>>>> ---------------------------------------------------------------------------
>>>>
>>>> ** Unsubscribe, subscribe, or view the archives at
>>>> http://www.vectorlist.org
>>>> ** Please direct other questions, comments, or problems to
>>>> chris@westnet.com
>>>
>>>
>>> ---------------------------------------------------------------------------
>>>
>>> ** Unsubscribe, subscribe, or view the archives at
>>> http://www.vectorlist.org
>>> ** Please direct other questions, comments, or problems to
>>> chris@westnet.com
>>
>>
>> ---------------------------------------------------------------------------
>> ** Unsubscribe, subscribe, or view the archives at
>> http://www.vectorlist.org
>> ** Please direct other questions, comments, or problems to
>> chris@westnet.com
>
>
>---------------------------------------------------------------------------
>** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
>** Please direct other questions, comments, or problems to chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Mar 13 21:52:29 2006