Re: SW Death Star Blooming

Turn down the brightness a bit.

Tom Bombaci wrote:

> My SW with a Wintron blooms on the DS explosion. It takes a few
> seconds for the HV to recover for the next level. Comparing to other
> SW’s, the bloom / recover time seems excessive on my setup. I have
> slight blooming when a blast hits the Xwing as well. Is there anything
> I can do to decrease the bloom / voltage drop?
>
> -Tom
>
> ------------------------------------------------------------------------
>
> *From:* owner-vectorlist@vectorlist.org
> [mailto:owner-vectorlist@vectorlist.org] *On Behalf Of *simon
> *Sent:* Wednesday, March 29, 2006 2:58 AM
> *To:* vectorlist@vectorlist.org
> *Subject:* VECTOR: SW Death Star Blooming
>
> I noted the other day that as on most vector monitors during the death
> star explosion some blooming is noticeable. I have heard that this was
> intentional, I find this hard to believe. I just rigged up my HV probe
> on my SW so that I could read the EHT during game play. it was rock
> steady at 19.5KV until the explosion...it dropped by 4kv!! I thought
> as much. This must be due to the amount of white screen. Can someone
> else check their original Red or Wintron?
>
> Thanks
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Wed Mar 29 15:43:22 2006