Joe,
Do you happen to have a scheme of the EHT transformer pinout and associated voltages. I'm hoping I can use a 6100 transformer to work in a 19v2000. They visually look similar. If it will take a comparable input and provide an appropriate output, I would be happy.
Tony
----- Original Message -----
From: Joseph Magiera
To: vectorlist@vectorlist.org
Sent: Monday, April 10, 2006 4:34 PM
Subject: Re: VECTOR: Tempest problems
I have to admit I haven't trouble shot yet. I fully planned to this past weekend, but too many family things came up. I did plan on cross testing it with another good Tempest boardset and another good 6101. I'll let the list know results.
Joe
"Christopher X. Candreva" <chris@westnet.com> wrote:
On Sun, 2 Apr 2006, joemagiera wrote:
> Another game party casualty. After on for a few hours in a warm room with
> 20+ other games on, my Tempest developed two problems:
Since no one ever answered this I'm going with my standard: Have you
verified that it is the board or monitor ? I usually just hook up my scope
in XY mode as a second monitor and compare the two images .
I've seen weird things like this happen when I had loose solder joints in my
monitor.
==========================================================
Chris Candreva -- chris@westnet.com -- (914) 967-7816
WestNet Internet Services of Westchester
http://www.westnet.com/
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Apr 10 18:32:01 2006
This archive was generated by hypermail 2.1.8 : Thu Apr 13 2006 - 19:50:00 EDT