Re[2]: Motorola 7696 source or cross?

-----Original Message-----
From: John Robertson <pinball@telus.net>
To: vectorlist@vectorlist.org
Date: Tue, 4 Jul 2006 19:08:07 -0700
Subject: Re: VECTOR: Motorola 7696 source or cross?

>
> Hi Chris,
>
> Did you check my Motorola X-reference page on Flippers.com?
>
> http://www.flippers.com/transist.html
>
> Check the schematic for another number for the 7696. Well, I can see
> it isn't likely to be there, but at least there is a reference for
> the smaller transistors used in the Motorola monitors...
>
> If it IS the HOT, then almost any HOT should work. Whatever you use
> for the Electrohome HOT is fine I would think.
>
> John :-#)#
>
> At 5:09 PM -0700 7/4/06, Chris Loggans wrote:
> >Does anyone know of a source or cross for an old Motorola 7696
> >transistor? It was used as the horizontal output transistor in the
> >Motorola M5000 series monitors.
> >
> >Thanks in advance,
> >-Chris
> >

sounds like a job for the good-old BU508 series.

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Jul 4 22:37:54 2006