Out of interest I will set one up on the bench and drive it to see how much voltage/current it will give before failing, I can only measure up to 40KV but I'm sure that's high enough
Anyways, I hope your HV units work out, Simon, and I'd like to order 3 if they do!
No problem, Thanks
----- Original Message -----
From: MKDUD@aol.com
To: vectorlist@vectorlist.org
Sent: Wednesday, August 23, 2006 6:18 AM
Subject: Re: VECTOR: Amplifone replacement is here!!
In a message dated 8/22/2006 2:12:34 PM Eastern Standard Time, xx.vl@cinelabs.com writes:
The difference being that the Amplifone soak test was (as legend has it)
performed _during_ manufacture. Simon's soak test is _post_ manufacture
(after the potting's cured and water can't get in).
Soak test in manufacture?? The story (found in the faq, which I seriously have to update after almost 10 years!) was that SOME of the HV winding spools MAY have gotten wet when the sprinkler system came on in the Amplifone plant.
Anyways, I hope your HV units work out, Simon, and I'd like to order 3 if they do!
Thanks,
Michael Kelley
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.11.4/424 - Release Date: 8/21/2006
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Wed Aug 23 02:13:59 2006
This archive was generated by hypermail 2.1.8 : Wed Aug 23 2006 - 08:50:02 EDT