You'd have to wind one up from scratch using a yoke from a 90 deg tube.... the 6100 yoke is physically too large in diameter.
James Hagen
---- andre <livnfree_can@yahoo.com> wrote:
> How hard is it to match or modify a 6100 deflection to
> match a different yoke/tube config?
>
>
>
> --- peter jones <highwayman2000@mail.ru> wrote:
>
> >
> > -----Original Message-----
> > From: andre <livnfree_can@yahoo.com>
> > To: vectorlist@vectorlist.org
> > Date: Mon, 9 Apr 2007 08:40:39 -0700 (PDT)
> > Subject: Re: VECTOR: Re[2]: VECTOR: Re[2]: VECTOR:
> > Re[2]: VECTOR: re: new WG6100 HVU/deflection
> >
> > >
> > > So what is the important part here? Matching the
> > > angle, or pinout, or both or something else? When
> > I
> > > talked to Rell about using an amplifone tube in my
> > > 6100 they were all over the angle difference (90
> > vs
> > > 100). I would think pinout could always be solved
> > with
> > > a soldering iron..
> > >
> >
> > angle is the thing, because the yoke is designed for
> > a specific one.
> >
> > as you say the pinout can be sorted as can minor
> > differences in voltages if it happened.
> >
> >
> ---------------------------------------------------------------------------
> > ** Unsubscribe, subscribe, or view the archives at
> > http://www.vectorlist.org
> > ** Please direct other questions, comments, or
> > problems to chris@westnet.com
> >
>
>
>
>
> ____________________________________________________________________________________
> We won't tell. Get more on shows you hate to love
> (and love to hate): Yahoo! TV's Guilty Pleasures list.
> http://tv.yahoo.com/collections/265
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to chris@westnet.com
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Apr 9 17:45:49 2007
This archive was generated by hypermail 2.1.8 : Mon Apr 09 2007 - 23:50:00 EDT