You'd also have to modify the neck board for the RGB signals (since the neck
pinout in different) if you used a new style crt, but thats not to hard.
Fred
> You'd have to wind one up from scratch using a yoke from a 90 deg tube.... the
> 6100 yoke is physically too large in diameter.
>
> James Hagen
>
>
>
> ---- andre <livnfree_can@yahoo.com> wrote:
> > How hard is it to match or modify a 6100 deflection to
> > match a different yoke/tube config?
> >
> >
> >
> > --- peter jones <highwayman2000@mail.ru> wrote:
> >
> > >
> > > -----Original Message-----
> > > From: andre <livnfree_can@yahoo.com>
> > > To: vectorlist@vectorlist.org
> > > Date: Mon, 9 Apr 2007 08:40:39 -0700 (PDT)
> > > Subject: Re: VECTOR: Re[2]: VECTOR: Re[2]: VECTOR:
> > > Re[2]: VECTOR: re: new WG6100 HVU/deflection
> > >
> > > >
> > > > So what is the important part here? Matching the
> > > > angle, or pinout, or both or something else? When
> > > I
> > > > talked to Rell about using an amplifone tube in my
> > > > 6100 they were all over the angle difference (90
> > > vs
> > > > 100). I would think pinout could always be solved
> > > with
> > > > a soldering iron..
> > > >
> > >
> > > angle is the thing, because the yoke is designed for
> > > a specific one.
> > >
> > > as you say the pinout can be sorted as can minor
> > > differences in voltages if it happened.
> > >
> > >
> > ---------------------------------------------------------------------------
> > > ** Unsubscribe, subscribe, or view the archives at
> > > http://www.vectorlist.org
> > > ** Please direct other questions, comments, or
> > > problems to chris@westnet.com
> > >
> >
> >
> >
> >
> >
> ________________________________________________________________________________
> ____
> > We won't tell. Get more on shows you hate to love
> > (and love to hate): Yahoo! TV's Guilty Pleasures list.
> > http://tv.yahoo.com/collections/265
> > ---------------------------------------------------------------------------
> > ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> > ** Please direct other questions, comments, or problems to chris@westnet.com
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to chris@westnet.com
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Apr 9 23:46:08 2007
This archive was generated by hypermail 2.1.8 : Tue Apr 10 2007 - 02:50:01 EDT