-----Original Message-----
From: "Ron Matuszak" <ron.matuszak@bex.net>
To: <vectorlist@vectorlist.org>
Date: Mon, 9 Apr 2007 21:15:28 -0400
Subject: VECTOR: 6100 Problem
> Hi Everyone,
>
> I just rebuilt my 6100. With a full cap kit from Bob Roberts, and a LV2000. It powers up now. (I bought it dead) But it has one problem. When you first turn it on. It flickers no/off for about 45 seconds. Then it will display the screen fine. The best way to describe it is, It's like a florescent light with a bad starter. I checked my voltages and I only have 160v at pin 5 on P900. Could that be why ? The rest of them look good. I'm stumped... I checked and rechecked everything. Any idea why pin 5 is low ? Also when it's flickering the spot killer lights. The only part I didn't replace was the HV adjustment. Should I have ?
>
never trust old pots, you know on old audio gear you get a crackle-sound when you play with the volume - well imagine those spikes arent sound but volts from a psu!
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Apr 10 12:28:02 2007
This archive was generated by hypermail 2.1.8 : Tue Apr 10 2007 - 13:50:00 EDT