Re: Lunar Lander troubleshooting help please

From: Christopher X. Candreva <chris_at_westnet.com>
Date: Fri Apr 13 2007 - 08:49:42 EDT

On Fri, 13 Apr 2007, Jim Visser wrote:

> What should I check on my monitor to fix the collapse?

Take your oscilloscope, connect it to the pins on the PCB where the signal
comes right out of the game board. Do you have a picture there ?
If no, bad cable.

If yes, use the schematic, trace the path through the monitor until the X
signal becomes 0

In other words -- "Can you hear me now ? Good !"
:-)

==========================================================
Chris Candreva -- chris@westnet.com -- (914) 948-3162
WestNet Internet Services of Westchester
http://www.westnet.com/
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Fri Apr 13 08:49:43 2007

This archive was generated by hypermail 2.1.8 : Fri Apr 13 2007 - 09:50:00 EDT