Re: Re[2]: Re[2]: WG 19v2000 query..

Well i removed the pot and meter'd it and it was perfect, right value and
nice clean sweep, but looking at the circuit it was in there were 2 dry
joints one on resistor R917 iirc and one on one of the pins on the connector
of P900 at the bottom. Seeing this i thought i'd better check the Deflection
pcb too and sure enough connector P500 had 4 pins with dry joints too, after
reflowing all of these bingo nice clean image with rock solid vectors....

Pinx

>>
>> Hi Peter,
>>
>> Rubber boots ?? you mean like the ones on a WG6100 ? On this HV pcb there
>> is
>> just a 5M ohm pot on the edge of the pcb for adjusting focus.
>>
>
> i was thinking of 6100's and i'v seen it on a g07 raster too,
> i didnt know the bw was different - been so long since i saw mine!
>
> maybe the pot's bad, is it an open type?
> they get dirty tracks.
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sun Apr 22 09:57:04 2007