Re: Modern Vector demo!

From: <kstillinger_at_sc.rr.com>
Date: Tue Aug 07 2007 - 16:14:18 EDT

About the output ranges- (this is from the readme in the source)

" Once the software is running, it may be necessary to adjust the Volts/Div
   controls (usually both channels will be set to the same range). Mine seems
   to work best at somewhere between 50 and 200mV (millivolts) per division."

So, it just sounds like an amplifier (audio) is all that's needed to adjust the signal to fit any vector display input. I didn't read enough to determine how any intensity input to the scope is modified. It sounds like these are just X and Y outputs (from the left/right channels).

  Kerry

---- peter jones <highwayman2000@mail.ru> wrote:
> http://sourceforge.net/projects/scopeshapes
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Aug 7 16:14:21 2007

This archive was generated by hypermail 2.1.8 : Tue Aug 07 2007 - 16:50:00 EDT