Re: Which Chassis to drive a 25" A63ABZ26X ?

From: Malcolm Mackenzie <maxstang_at_sbcglobal.net>
Date: Sat Jul 05 2008 - 22:49:44 EDT

Hey James,
   
  That's the tube I was going to attempt this on (U2000). Could you send me a picture of your shunt job. I'm new at the convergence thing (having only done 6100 before), and I'm interested in your placement method.
   
  It would be great if we could get a definitive method as to how to do this on the Vectorlist. -Malcolm

James Hagen <jamesjonhagen@gmail.com> wrote:
  You can go either way, (AMP or 6100 parts) but be prepared to
desolder/swap out the neck connector if using 6100 def board/HV cage.
Amplifone is preferred as it does a better job keeping up with SW.

I ended up using a tube from a WG U2000/5000 convergence was tough,
but when looking at pics of an original 25" in a SW CP, it seems that
even original 25" Amp tubes have about 50 magnetic shunts ;-)

Scott Evans sent me an original 25" Amp yoke a while back- the part
number on the yoke is not the same, but in terms of shape, windings,
it's identical to a 6100 yoke... and was no easier to converge than
having already tried a standard 6100 yoke....

James H.

On Sat, Jul 5, 2008 at 7:43 PM, Malcolm Mackenzie
wrote:
> I'm attempting to do this as well Colin. My understanding is that you only
> need the 6100 yoke ( it's the same part as the 25" Amplifone yoke) and then
> the HV and deflection boards from the Amplifone. -Malcolm
>
> Colin Davies wrote:
>
> Hi Guys,
>
> I've been offered a 25" A63ABZ26X picture tube for my Starwars cockpit which
> is currently fitted with a 19" WG6100. I also have a 19" Amplifone monitor
> complete.
>
> Is this a drop in replacement for the origonal amplifone tube running from
> an amplifone chassis (fitted with 6100 yoke), or do I need to use a 6100
> chassis to drive this ?
>
> I think the pinouts are different on the two chassis / tubes looking at the
> manuals, but can anyone confirm please ?
>
> One of the kind members on here has pointed me to this article...which leads
> me to belive that I do need to use a 6100 chassis / neck board.
>
> http://groups.google.com/group/rec.games.video.arcade.collecting/browse_thread/thread/15bc596122ad8409/cdc315860f1194b2?lnk=gst&q=amplifone+25+19&rnum=26
>
> Thanks, Regards,
> Colin
>
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sat Jul 5 22:49:46 2008

This archive was generated by hypermail 2.1.8 : Sun Jul 06 2008 - 19:50:01 EDT