Re: "Clay Cowgill's" pincushion corrector

Clay, did you find any of these ?

I've reached the point where I've got perfect convergence but the
pincushion is irritating me....

Thanks !

Op 12 apr 2009, om 12:02 heeft Clay Cowgill het volgende geschreven:

>> It's strange that I have this poor pincushion (it's actually
>> worse than in your picture) while I'm running a 100% original
>> Amplifone set- up in my cockpit. Every board in there has the
>> same serial nr.
>
> Is your HV up where it should be? (Just wondering if it was high/low
> resulting in an incorrectly sized image that maybe you've just
> partially
> corrected using the width controls or something?) The yoke is fully
> seated
> on the neck? (Not to far forward or back?)
>
>> So, do you have any Rev.3 left ? I need at least one (maybe a
>> couple)....
>
> I don't think I do, but I'll just order the Rev4's. I haven't had any
> available for years, so I'm sure some people will want some.
> They're tiny,
> so they should ship overseas pretty cheap too.
>
>> While we're talking SW, any progress on the new SW/ESB kit
>> with the extra's ?
>
> I did! ...but not in a long while. (*Shakes fist angrily at
> consulting
> business being busy*) I did get the "lost" voice samples added back
> in and
> then I dropped back and did a bunch of tool work. Got a raster-
> >vector
> converter going with Atari AVG output so I can make menu and on-
> screen stuff
> easier. I tried out my new sound board daughtercard, but that
> didn't work
> first try so I set it aside to "deal with you later".
>
> The PROM replacement board has over 3500 hours on it now in Ground
> Kontrol
> with no problems, so that looks good. It gets rid of a surprising
> amount of
> heat in the cage, which is nice.
>
> I also did a little spelunking through some weird old metafiles and
> it looks
> like I have a couple complete sets of test builds of the game prior to
> release. I haven't tried pulling the data out of those to build
> ROMs yet,
> but it has potential. I'm eyeballs deep in a couple overly complex
> things
> (Freescale i.MX31 and a TI OMAP3530 hardware-- gotta like 3000+ page
> reference manuals ;-), so progress is slow, but I'm picking away at
> it when
> I find time.
>
> -Clay
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to chris@westnet.com

André Huijts
andre.huijts@upcmail.nl

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sun Jul 5 09:24:30 2009