Re: FS: New 19VLTP22 tube + WG6100 yoke in Marlborough, MA

From: Joel Rosenzweig <joel_at_helitronix.com>
Date: Mon May 31 2010 - 21:54:43 EDT

This has been spoken for and there's now a second in line. If it falls through on both, I'll post this again.

Thanks,
Joel

On May 31, 2010, at 9:06 PM, Joel Rosenzweig wrote:

> I have a new, unused, 19VLTP22 tube, made from National Electronics. I bought this from Richardson Electronics in about 1997 and never managed to move forward with my project. I had planned to use it in a WG6100 vector monitor.
>
> The tube is perfect, and it comes with a WG6100 YOKE, and a metal chassis to hold it.
>
> I prefer local pickup because I just found out the hard way how much UPS shipping costs when you pack a CRT very carefully. If you really want it shipped, just understand that it is not cheap to ship when you don't have a custom tube box. :-)
>
> I paid about $165 for this tube, and I'd be happy to get $75 for the whole thing (including the yoke and metal chassis).
>
> Tube is located in Marlborough, MA.
>
> Joel
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon May 31 21:55:54 2010

This archive was generated by hypermail 2.1.8 : Mon May 31 2010 - 22:50:00 EDT