Re: G05 HV-adjust pot replacement

Two 805's at the moment, with a couple 802's waiting in the wings.

I'll give it a try. As you said, so long as I can adjust the HV to
12kv, it should be fine.

Thanks,

Alan

Mark Shostak wrote:
> You didn't specify 801 or 802, but you should be fine in either case.
> Just make sure you can adjust the anode voltage within its proper range,
> and make sure it's not on the edge.
>
> If not, on the 801 you can change R913. On the 802 you might have to get
> a little more creative. Most likely it will just work. Let us know what
> you find.
>
> -Mark
>
>
> On Thu, Jun 3, 2010 at 6:08 AM, Total Impulse <totalimpulse@comcast.net
> <mailto:totalimpulse@comcast.net>> wrote:
>
>
> I'd like to replace the HV adjustment pot in a couple G05's.
> However, I'm having trouble coming up with a direct replacement for
> the original 4.7k pot. Would it be safe to substitute a 5k pot
> instead? (That's what the V2000 used.)
>
> Thanks,
>
> Alan

-- 
Total Impulse - Just Having Fun!
Alan Estenson, totalimpulse@comcast.net
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com