Tragic 19VLUP22 tube...Please help if you can

From: <MKDUD_at_aol.com>
Date: Sat Jun 12 2010 - 23:11:34 EDT

Hello,
 
     I have been helping a friend restore his Tempest, and he recently was
able to get a NOS 19VLUP22 tube . Tube seemed to be packed pretty well, in
original NOS box, and looked good when unpacked. Never was bumped, jarred,
or mishandled in any way during installation. Installed tube to chassis,
began convergence.
 
    Yoke and purity assembly were both still LOOSE, nothing tightened.
Moved yoke carefully forward to do green calibration, screen was getting nice
green crosshatch, starting to look good, suddenly the tube fades goes
dark. I'm thinking, something must be up with the HV, I still hear yoke
chatter, spot killer is off, picture was there, then faded. Suddenly, I hear the
sizzle, and see the blue arc in the neck, and want to start ripping the rest
of my hair out...
 
     Does anybody have a source on new tubes? Please help if you can.
 
     The old tube in this game has so much phosphor burn that it is almost
unusable, former owner had to leave this poor thing running for a LONG
time with no signal to monitor, the burns are terrible.
 
I remember Richardson electronics, but I guess they're long gone as a tube
supplier of these..Please help if you can.
 
Thanks Very Much,
Michael Kelley

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sat Jun 12 23:11:43 2010

This archive was generated by hypermail 2.1.8 : Mon Jun 14 2010 - 12:50:00 EDT