The schematics I pulled up say F5 is an LS194 with pin one being LATCH1
(inverted) and pin 2 going to P R15. But there is a connection dot at pin 1
and I am using printing 2 of the schematic, so on printing 1 they MIGHT have
been incorrectly connected together.
On Sat, Jun 26, 2010 at 6:33 PM, Kevin Moore <talon.k@gmail.com> wrote:
> So I was looking through the schematics today, and it seems that there is a
> problem in the vector-generator data shifter section. Specifically with F5.
> Perhaps I'm just confused, so I thought I would ask and see. But it looks to
> me like pins 1&2 are tied together. Instead of having /Latch1 going into pin
> 1.
>
> Also could someone explain to me what the P,R15, and P,R31 lines are?
>
> Thanks,
>
> Kevin
>
>
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sat Jun 26 21:51:09 2010
This archive was generated by hypermail 2.1.8 : Sat Jun 26 2010 - 22:50:00 EDT