Re: Anyone have a neckboard or a connector for a 19VLUP22?

18.4 kV on startup. 18.6 after 10 minutes or so.

I haven't tried to tweak it up to 19.5 kV yet.

From: Mark Shostak
Sent: Sunday, July 18, 2010 9:32 PM
To: vectorlist@vectorlist.org
Subject: Re: VECTOR: Anyone have a neckboard or a connector for a 19VLUP22?

What does the HV do over the same period of time?

Sent from my iPhone so delivery may be delayed due to AT&T network congestion.

On Jul 18, 2010, at 5:02 PM, "Werner Sharp" <wsharp@gmail.com> wrote:

  Now back to monitor troubleshooting....

  My one 6100 I just started using takes a long while to brighten up. If I first turn it on, the vectors are practically invisible (ZVG menu software) but if I turn the brightness all the way up it looks fine. But as it is on longer, the vectors brighten and I get a red dot in the center. After 15 minutes, I've dialed back the brightness knob several times to remove the red dot and have it look okay.

  Is this a weak tube or some other problem?

  Thanks.

  -Werner

  From: Mark Shostak
  Sent: Sunday, July 18, 2010 11:37 AM
  To: vectorlist@vectorlist.org
  Subject: Re: VECTOR: Anyone have a neckboard or a connector for a 19VLUP22?

  Andrew,

  No problem. Thanks for the clarification.

  I have no problem with someone having an opinion different than mine, but as you picked up, you can be diplomatic without having to be PC; just "wrong" is as good as "completely wrong", or even "here's a different view/idea/interpretation/perspective/whatever".

  Back to the fuzzy games...

  Thanks,
  -Mark

  On Sun, Jul 18, 2010 at 10:21 AM, Andrew Welburn <andy@andysarcade.net> wrote:

    Mark.. a thousand apologies upon you..

    I was referencing the second poster 'matt' who said that its supposed to defocus by design...

     Inadvertantly i said 'mark' when i should have said 'matt' (his last name is not given..) if i had meant you, i would have said your full name. I was 'adding to the vibe' - meaning that i was adding to your correct assertion that it should only occur during the death star explosion but further qualifying it by adding it was only a design 'feature' of Amplifone monitors, the OP has a WG 6100... I was backing you up, but also pointing out that 6100's don't defocus on the death star explosion so 'matt' was completely wrong...

    My early sunday-morning haze is to blame for saying 'mark' instead of 'matt', and yes, even so, i didn't put it very diplomatically anyway...

    --
    Andrew Welburn
    http://www.andys-arcade.com
      ----- Original Message -----
      From: Mark Shostak
      To: vectorlist@vectorlist.org
      Sent: Sunday, July 18, 2010 3:43 PM
      Subject: Re: VECTOR: Anyone have a neckboard or a connector for a 19VLUP22?

      Andrew, would you care to clarify your statement?

      On Sun, Jul 18, 2010 at 5:12 AM, Andrew Welburn <andy@andysarcade.net> wrote:

        And to add to the vibe, 'mark' is completely wrong, the defocussing was only a feature of the Amplifones, and only for the death star explosion.

        --- On Sat, 7/17/10, Mark Shostak <shostakmark@gmail.com> wrote:

          I have to disagree on that one.
          The de-focusing effect is only supposed to occur _during the death star > explosion_.
          In normal operation, both bright and dim vectors should be in focus.

      You made the assertion that I was "completely wrong", which, even if it were true, is a pretty inflammatory way to point it out.

      Then, you proceed to replicate my exact statement. That would make _you_, as "completely wrong", as I.

      Nice; I appreciate it.

      -Mark

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Jul 19 21:11:43 2010