RE: Asteroids Deluxe graphic problem

From: Chris Brooks <armis_at_pcdochouston.com>
Date: Wed Oct 27 2010 - 10:23:14 EDT

Wow. that would be a hell of a DOG board.. Was it even worth it?

 

Thanks,

Chris Brooks

713-341-9850

  _____

From: owner-vectorlist@vectorlist.org
[mailto:owner-vectorlist@vectorlist.org] On Behalf Of Kevin Moore
Sent: Wednesday, October 27, 2010 9:22 AM
To: vectorlist@vectorlist.org
Subject: Re: VECTOR: Asteroids Deluxe graphic problem

 

Ok for anyone interested here's the repair log for the Asteroids Deluxe.

I think I got everything included here.

Asteroids Deluxe repair log

Upon power up got nothing.

Hooked up Fluke and checked Rom/Ram

Could read the Vector Side ok, but nothing from Program side.

Found Dead ls139 @ L2

Could now read program side, but not vector.

Seems Some of the pins on L2 were stuck so I could read the Vector side but
upon replacement
they were no longer stuck.

Found Bad ls157's at F2, H2, J2, and K2 replaced and can no read Vector, and
Program sides ok

However there were bad eproms @ D1, E/F1, F/H1, and R2 Burned new ones.

Power up and get watchdog.

Remove pin 1 from LS42 at L5 game now plays blind, but with some strange
explosion sounds
and no thrust sound, just a faint pop.

Start troubleshooting VSM

Ground watchdog Disable, and game plays blind as well.

Pull and check custom prom @ C8 checks good.

Find bad Ls193 @ J4, and K4

Now greated with a horrible picture.

http://picasaweb.google.com/lh/photo/tX2PtYo8mbqyeGJnbnmb3LU4nHRf6SnmoWh4viF
d1vI?feat=directlink

Replaced a bad ls157 at bc/10 I now have this.

http://picasaweb.google.com/lh/photo/Jf76pGvmPLKkYUy9cYkU6LU4nHRf6SnmoWh4viF
d1vI?feat=directlink

http://picasaweb.google.com/lh/photo/hDDl6Um13oNfPRaLoCihLLU4nHRf6SnmoWh4viF
d1vI?feat=directlink

Replace both am6012 chips, and we are getting closer

http://picasaweb.google.com/lh/photo/KGi71hzc0t_uCpT01lPrn7U4nHRf6SnmoWh4viF
d1vI?feat=directlink

http://picasaweb.google.com/lh/photo/X7B7TU2mwlvC82BK1F-T3rU4nHRf6SnmoWh4viF
d1vI?feat=directlink

Found K9 pin 3 stuck that cleared up the diag lines

Scaling is wrong for ships, and it appears there are no medium asteroids.
Found bad ls175 @ M6

Having problems with Highscore table. When going into game mode, it would
display BFBFBF
while trying to load the top 3 scores. Found bad ls174 @ N10 but then the
table would
now try to load FFFFFF also found bad ls244 @ M9 and bad Earam.

Highscore table now works. Onto the sound problems.

Found bad Pokey, and ls164 @ P8 noise generator

All is good.

Parts
4 2516 Eproms
1 ls245
2 ls193
5 ls157
1 ls191
1 ls142
1 Pokey
2 ls164
1 ls244
1 earam
1 ls175
2 am6012
1 tl081

12 16 pin sockets
1 8 pin socket
3 20 pin sockets
1 22 pin socket
2 14 pin sockets

Kevin

On Wed, Oct 27, 2010 at 12:17 AM, Kevin Moore <talon.k@gmail.com> wrote:

Well there was definitely a problem in the Z Pin 3 of K9 was stuck, as for
the asteroid size, Stuck Pin 2 at M6.

Now to figure out why the explosions sound like the ball hitting a pong
paddle.

P6, P7, R7 and the associated Nor, Or and Buffers are good..

Kevin

On Tue, Oct 26, 2010 at 11:19 PM, Kevin Moore <talon.k@gmail.com> wrote:

The camera caught the Press Start when it was blinking. It looks normal,
not on the picture.

One other thing I've noticed, is there seems to be no medium asteroids. They
go from large to small when shot.

Kevin

On Tue, Oct 26, 2010 at 10:17 PM, Rodger Boots <rlboots2@gmail.com> wrote:

Wild guess, looks like Z-axis (brightness) is backwards. "Press start"
should be brightest, diagonals should be invisible.

 

On Tue, Oct 26, 2010 at 4:02 PM, Kevin Moore <talon.k@gmail.com> wrote:

Been working on a very dead Asteroids Deluxe. I've finally got picture. In
game mode I've got a vertical line going up form the center, then angling
off to the upper right. I also have diagonal lines under the zero scores.

http://picasaweb.google.com/lh/photo/KGi71hzc0t_uCpT01lPrn7U4nHRf6SnmoWh4viF
d1vI?feat=directlink

In test mode I have 4 0's on the upper dip switch settings then a diagonal
line for the 5th, Looking at the manual I think there should be only 4 0's
on both dip switch lines, but the bottom has 5.

http://picasaweb.google.com/lh/photo/X7B7TU2mwlvC82BK1F-T3rU4nHRf6SnmoWh4viF
d1vI?feat=directlink

any ideas?

Kevin

 

 

 

 

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Wed Oct 27 10:26:29 2010

This archive was generated by hypermail 2.1.8 : Wed Oct 27 2010 - 11:50:00 EDT