RE: starhawk problems

From: <kspradling_at_kc.rr.com>
Date: Sat Apr 16 2011 - 13:36:09 EDT

www.findchips.com shows Quest Industries has 4 of these...
---- vernimark <vernimark@vernimark.com> wrote:
> Yes I've a space wars... do you know where to buy an LF13331?
>
>
>
> DAC80s are soldered, I'll try to remove them without any damage
>
>
>
> Thank you,
>
> vernimark
>
>
>
> _____
>
> From: owner-vectorlist@vectorlist.org
> [mailto:owner-vectorlist@vectorlist.org] On Behalf Of Rich Marquette
> Sent: sabato 16 aprile 2011 13.03
> To: vectorlist@vectorlist.org
> Subject: RE: VECTOR: starhawk problems
>
>
>
> Based on the picture, I would think that the problem is in the monitor
> itself. Probably in one of the digital parts of it (DACs or Analog switch)
> Do you have another Cinematronics vector game you can put the CPU board
> into?
>
> You could try swapping the two DAC chips around on the monitor and see if
> the picture changes.
>
>
>
> Rich
>
>
>
>
>
> From: owner-vectorlist@vectorlist.org
> [mailto:owner-vectorlist@vectorlist.org] On Behalf Of vernimark
> Sent: Saturday, April 16, 2011 6:01 AM
> To: Vectorlist
> Subject: VECTOR: starhawk problems
>
>
>
> Hi All,
>
> after a long time I'm trying to continue with my star hawk project; it is
> almost complete with the ecception on the most important part: PCB :-)
>
>
>
> this is what I see:
>
> http://www.vernimark.com/temp/starhawk01.jpg
>
> star ships are complete when fly on the top-left quarter of the screen but
> then lose some vectors moving on the bottom-right. Sounds are ok.
>
> background is incomplete as shown in the picture.
>
> The game works, I can insert coins and play with one or two players
> selecting different speeds.
>
> Do you have any idea?
>
> On your opinion is it a PCB problem or board problem?
>
> Thank you,
>
> vernimark
>
>
>
>
>
>
>
>
>
>
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sat Apr 16 13:36:11 2011

This archive was generated by hypermail 2.1.8 : Sat Apr 16 2011 - 13:50:00 EDT