Re: P329 WG6100 HV box difference

From: Rodger Boots <rlboots2_at_gmail.com>
Date: Sat May 14 2011 - 17:13:21 EDT

Red yellow yellow = 240 Kohms. Wouldn't think it would have to be there,
probably why it isn't on the schematic.
On May 14, 2011 3:58 PM, "Werner Sharp" <wsharp@gmail.com> wrote:
> Did my post come through with a picture of my gb board? My resistor is red
> yellow yellow. Andy ill send it to you directly.
> On May 14, 2011 4:52 PM, "Andrew Welburn" <andy@andysarcade.net> wrote:
>> ok now i see the pdf, i just saw the photos on the page before.. alas,
the
> photo is of a P329 without this resistor.
>>
>> i made a quick diagram of where/how this resistor sits in the circuit,
> have you got any ideas as to a value it should be? and have you seen this
> revision of P329 before?
>> http://www.andysarcade.net/pix/DSC_1833.JPG
>>
>> --
>> Andrew Welburn
>> http://www.andys-arcade.com
>> ----- Original Message -----
>> From: Mark Shostak
>> To: vectorlist@vectorlist.org
>> Sent: Saturday, May 14, 2011 8:56 PM
>> Subject: Re: VECTOR: P329 WG6100 HV box difference
>>
>>
>> Now that I'm in front of a computer...
>>
>>
>> Remember to take the shrink wrap off the manual; page 8, figure 2.
>>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sat May 14 17:13:24 2011

This archive was generated by hypermail 2.1.8 : Sat May 14 2011 - 17:50:01 EDT