Ive never seen a tempest with a CR-23..unless its got an
amplifone.. I think you can remove the little plastic deal on the
G08 tube and use it on the CR-23. You'll have trouble with the
yoke, unless the CR-23 tube is a 100 degree tube.
You could cut the traces to the socket for the RGB sends, Maybe
leave the neckboard unplugged?
> The G08 has neon bulbs which as I understand it are intended to show
if
> one of the cathodes is bad inside your tube.
>
> Does anyone know if it’s possible to test this
circuit without blowing
> the circuitry.
> I’m probably going to redesign the neckboard on
my G08 as I need to do a
> tube swap due to broken heater pins and would like to test that this
new
> board lites the neon bulbs.
> The new tube won’t be a G08 tube; but a tempest
tube w/ a CR-23 socket.
>
> John
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Wed Sep 12 06:43:23 2012
This archive was generated by hypermail 2.1.8 : Wed Sep 12 2012 - 07:50:00 EDT