Re: Testing vectorbeam monitors.

From: teeray <teeray_at_earthlink.net>
Date: Thu Feb 28 2013 - 01:33:02 EST
John,

Could you send me a copy of those also
Please send to teeray2288@netzero.net
because this mail box is almost full

I'll see if I can clean them up some.

Thanks
Tim

-----Original Message-----
From: John Robertson
Sent: Feb 27, 2013 4:26 PM
To: vectorlist@vectorlist.org
Subject: Re: VECTOR: Testing vectorbeam monitors.

On the way...

These are about 3.5mb each though...need to be cleaned up a bit. I have them in TIFF format if someone wants to do some editing of dust/smudges, etc. to shrink them. They are 11 X 17 inch format.

John :-#)#

Carlos Rubio wrote:
John, would you mind sending me those early Vectorbeam monitor schematics?  I've been looking for those!  Thanks,

Carlos


On Wed, Feb 27, 2013 at 3:52 PM, John Robertson <pinball@telus.net> wrote:
Hi Pat,

If you want to send me the raw doc file I'll see about getting it up on the wiki and keep an eye on it until someone with more time./interest wants to watch over it.

I have some schematics I want to add for example - early Vectorbeam monitor ones that have the alternate part numbers sometimes found...

John :-#)#

Pat Danis wrote:
Just heard back from Tom.  His e-mail has been edited for only the pertinent info.  Basically he says yes.  He has included the original Doc. file.  I am the last person to be put in charge of this project although I am more than willing to contribute.  If there is a knowledgeable volunteer that wants to take on this project, please let me know and I will forward the doc to you.

Pat

Quote:


"Hey Pat, Please update and modify it. I wanted input from other (more knowledgeable) people than myself. File attached. I don't need/want any credit, so don't worry about that.

tm"

end quote



On 2/24/2013 10:18 PM, John Robertson wrote:
Pat Danis wrote:
John:

Tom sold off most of his arcades and projects.  I bought a lot of it.  There are others that managed to get a few gems.  I can give him a call and ask about modifying the FAQ.  I don't think he will mind as long as proper attribution is given.

Pat
Yes, if Tom has the .doc original that would be better, perhaps it could be treated like LibreOffice etc. and perhaps a small committee can oversee updates.

John :-#)#
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com


---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com



--
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                www.flippers.com "Old pinballers never die, they just flip out"

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com



-- 
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                 www.flippers.com 
"Old pinballers never die, they just flip out"
--------------------------------------------------------------------------- ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org ** Please direct other questions, comments, or problems to chris@westnet.com Received on Thu Feb 28 01:33:27 2013

This archive was generated by hypermail 2.1.8 : Thu Feb 28 2013 - 01:50:06 EST