Re: Unraveling the Star Wars harness

Thanks for the feedback everyone.

Good call on the coin counter/control panel, I know from my Paperboy
rebuild that there was a decent sized plug that ran to that little unit
that sat within the coin door, no doubt this is very similar.

Ed. that would be a huge help if you could identify the different plugs on
the harness, also if you could take a picture of your ar2 with all the
sockets plugged in that would be a big help due to those two connectors
that are exactly the same on that board (Atari what were you thinking???).

Joel

On Thu, Aug 1, 2013 at 8:47 AM, Ed Lawless <ed.lawless@gmail.com> wrote:

> Joel,
> I have a complete star wars up-right working with original
> amplifone monitor. If you haven't got this licked by 8pm est time. I can
> pull my cab out and snap some photos. Do the connectors have any markings
> on them? The one next to the edge connector looks to be the monitor. The
> last photo I am not sure of like everyone else. Never had to take apart my
> coin door so; I am not sure of the first one. But I can certainly can try
> and help verify.
> Ed
> On Jul 31, 2013 11:48 PM, "Pat Danis" <patdanis@verizon.net> wrote:
>
>> I have nothing here at the house that is Star WArs any more except for a
>> few parts. I'm thinking perhaps the second photo might be for the control
>> panel? Just a guess.
>>
>> Pat
>> On 7/31/2013 4:11 PM, Joel Griffin Dodd wrote:
>>
>> Yeah I saw they were the same. I looked for pictures of them plugged in
>> online. Looks like my ar2 is toast anyway though
>> On Jul 31, 2013 1:11 PM, "Douglas Gauck" <douglas@gauck.com> wrote:
>>
>>> Make sure you don't mix up the 9 pin plugs on the ARII board!
>>>
>>> -Douglas
>>>
>>> Sent from my iPhone
>>>
>>> On Jul 31, 2013, at 2:50 PM, Jimmy Ipock <jipock@gmail.com> wrote:
>>>
>>> I believe one of those plugs..the large one is the vector monitor
>>> connector.
>>> The smaller plug on the PS is the 110/220v selection plug.
>>>
>>>
>>>
>>> On Wed, Jul 31, 2013 at 8:27 AM, Joel Griffin Dodd <
>>> griffindodd@gmail.com> wrote:
>>>
>>>> Hi guys.
>>>>
>>>> I'm trying to piece together an entire star wars cabinet and have had a
>>>> lot of success gathering everything (special thanks to Pat).
>>>>
>>>> Connecting up my wiring harness I have everything plugged in except for
>>>> speakers and monitor and I'm a little confused about the plugs I have left
>>>> over. I've attached pictures of the three plugs I'm still trying to
>>>> identify. I assume one is to the amplifone one to the speakers and other
>>>> mystery things not sure on the third.
>>>>
>>>> Can you identify these remaining plugs?
>>>>
>>>
>>>
>> ---------------------------------------------------------------------------
>> ** Unsubscribe, subscribe, or view the archives at
>> http://www.vectorlist.org ** Please direct other questions, comments, or
>> problems to chris@westnet.com
>
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Thu Aug 1 12:35:24 2013