Re: WG6100 burning up R100

From: Andre Huijts <a.huijts_at_upcmail.nl>
Date: Sun Sep 01 2013 - 18:15:46 EDT

Pardon me, I of course ordered LV2000's not 6100's. I prefer Jeff's great service over the other seller's no service.

Op 2 sep. 2013, om 00:12 heeft Andre Huijts <a.huijts@upcmail.nl> het volgende geschreven:

> Examined a defective 6100 and I found F100 and F101 were blown. Replaced them but figured they went for a reason show checked all the chassis transistors and found a bad one, replaced with some type, measured out fine, no shorts to chassis.
>
> Since the LV section was still original I checked the parts there and noticed R100 had smoked (but still measured 15 Ohms out of circuit). Also checked Q100 and found it defective, replaced it.
> Checked all other parts in LV, seemed fine.
>
> Powered up, smoke from R100 but picture does come up (although wobbly), decide to power down.
>
> I wonder why R100 started smoking again. I'm positive I checked all transistors on the deflection board.
>
> I've ordered two LV6100's from Jeff but maybe I have to look for something else too ?
>
> Cheers, André
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to chris@westnet.com

André Huijts
andre.huijts@upcmail.nl

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sun Sep 1 18:15:51 2013

This archive was generated by hypermail 2.1.8 : Mon Sep 02 2013 - 10:50:00 EDT