Re: Sharp Monitor Schematics

As I've had several requests I called back and the support guy is going to
mail them out along with the rest of the schematics for the KTE and KTW
monitors. It should be noted that I was warned about the quality -- apparently
the earthquake in '94 flooded their tech support area and destroyed most
of their paper -- these are some that a guy had offsite..

Once I get them I'll copy and mail to those interested. The guy said he
didn't mind if they were scanned and put up somewhere.

Kurt

> Kurt, could you ask them to mail them out, then you could scan them and
> upload to Spies or some such site...
>
> John :-#)#
>
> At 10:21 AM 9/17/01, you wrote:
> >Turns out that "KTE-XX" and "KTW-XX" are old and not on the website -- but
> >they are willing to fax out the schematics (I hope they are legible).
> >
> >As an aside we talked about Sharp Image monitors and Isolation transformers
> >since that (or a lack of one) is what blew up this monitor.
> >
> >The tech had this to say about Sharp Image monitors:
> >
> > - IF the SI monitor is an "old" monitor - chassis is a KTE-XX or KTW-XX
> > then you HAVE to use an isolation transformer. Be sure to check the
> > chassis.
> >
> > - IF the SI monitor is a "new" monitor - chassis is a SI-XXX then you
> > shouldn't use an isolation transformer. And he said a common problem
> > is people still wire them through the existing isolation transformer
> > which is typically rated for .5A or 1A -- and these monitors draw
> > slightly more than that (125W). So the transformers burn up.
> >
> >Kurt
---------------------------------------------------------------------------
** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in the
** message body to rasterlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Sep 17 12:44:34 2001