RE: I Robot joystick problems

From: Bret Pehrson <bret_at_infowest.com>
Date: Thu Nov 13 2003 - 01:29:19 EST

I don't know if you saw my reply on the ng, but I'd recommend starting w/
the caps on the HE boards.

> -----Original Message-----
> From: owner-rasterlist@vectorlist.org
> [mailto:owner-rasterlist@vectorlist.org] On Behalf Of joemagiera
> Sent: Tuesday, November 11, 2003 3:07 PM
> To: rasterlist@vectorlist.org
> Subject: RASTER: I Robot joystick problems
>
>
> My I Robot is having recurring joystick problems. When it's
> left on too
> long, the joystick starts being goofy. It obviously is some
> sort of heat
> problem, as when the fan wasn't working the problem would show up in a
> couple of hours. I fixed the fan, and now the problem
> doesn't show up until
> about 4 hours.
>
> Upon start up (and even a few hours later), the joystick
> works fine and will
> pass the self test.
>
> However after 4 hours or so, it starts responding silly (it
> isn't totally
> dead, it just randomly does not respond correctly). If I do
> the self tests
> at this point, it reports that the joystick has "bad
> stability". When I
> look in the owners manual for this self test, it just says
> "have joystick
> serviced". Thanks a lot!
>
> Anyhow, anyone have any ideas where to start or what chip may
> control this,
> etc.? Thanks,
>
> Joe
> joemagiera@ameritech.net
>
> --------------------------------------------------------------
> -------------
> ** To UNSUBSCRIBE from rasterlist, send a message with
> "UNSUBSCRIBE" in the
> ** message body to rasterlist-request@vectorlist.org. Please
> direct other
> ** questions, comments, or problems to chris@westnet.com.
>
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from rasterlist, send a message with "UNSUBSCRIBE" in the
** message body to rasterlist-request@vectorlist.org. Please direct other
** questions, comments, or problems to chris@westnet.com.
Received on Thu Nov 13 01:29:27 2003

This archive was generated by hypermail 2.1.8 : Fri Nov 14 2003 - 22:50:01 EST