Re: Pole Position II Schematics Wanted

From: peter jones <highwayman2000_at_mail.ru>
Date: Tue Dec 05 2006 - 12:24:34 EST

-----Original Message-----
From: COLIN DAVIES <colin.w.davies@btopenworld.com>
To: rasterlist@vectorlist.org
Date: Tue, 5 Dec 2006 17:11:34 +0000 (GMT)
Subject: RASTER: Pole Position II Schematics Wanted

>
> Hi Guys,
>
> I've been on the Vectorlist for a while, and thought I'd have a look over the fence :-)
>
> I've just aquired an Atari Ireland Pole Position II upright machine. As far as I know, it has a Namco boardset fitted (each of the pcb's has a separate power plug) and two AR2's which appear to provide +5v to each of the boards.

pp1 and pp2 use the same pcb, it's a romswap.
one of the ar2's is used for audio, you can fit a switcher for the power and keep one ar2 for the amp function if you want.
the only problems i'v had with them is a worn deadspot on the throttle-pot, and a fucked gearshift.
(not on the same machine)

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Dec 5 12:24:47 2006

This archive was generated by hypermail 2.1.8 : Tue Dec 05 2006 - 14:50:00 EST