Re: Re: Zaxxon Electrohome Troubleshoot

Peter, sorry, I meant where, not when, would you
recommend I get replacements for the potentiometers if
that is what you recommend to be replaced?

Thanks

--- peter jones <highwayman2000@mail.ru> wrote:

>
> -----Original Message-----
> From: Dustin Holden <discuspro@yahoo.com>
> To: rasterlist@vectorlist.org
> Date: Sat, 3 Nov 2007 10:20:29 -0700 (PDT)
> Subject: RASTER: Zaxxon Electrohome Troubleshoot
>
> >
> > I've recently finished a cap kit on my Zaxxon's
> > electrohome G07. I did the optional C303 upgrade.
>
> > I've triple checked that all the capacitors are in
> the
> > right places, their polarity, and if there are any
> > cold solder joints. To my eyes everything looks
> fine.
> > Well I installed the board and now I get about
> 3/4 of
> > the screen. I can actually see the picture, it
> just
> > looks like it hits a wall 3/4 of the way across
> the
> > screen, and where it hits the wall it is really
> > intensely bright like everything is compressed
> into on
> > line.
> >
>
> what did it do before you fitted the kit?
> it may be a bad cap,
> or a wrong cap - one of them should be
> non-polarised.
>
> as for the other problem, the presets fail along the
> edge of the board - i replace them all.
>
>
---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or
> problems to chris@westnet.com
>

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sun Nov 4 17:51:14 2007