Re: WTB 9010 fluorescent display

Hi John, yeah that was my first thought. Unfortunately it's not them
(6118's), I swapped a couple around and the issue with the first 2 chars is
still there. I even jumpered between a working char and a non working
char, nothing. Jumpering from Char 1 to a free character works fine (I can
see the 'F') so it's definitely the Fluorescent display that has the issue.

Cheers,

Dan

-----Original Message-----
From: techtoolslist-bounces@flippers.com
[mailto:techtoolslist-bounces@flippers.com] On Behalf Of John Robertson
Sent: 14 June 2010 20:11
To: Technical Tools Mail List
Subject: Re: [Techtoolslist] WTB 9010 fluorescent display

Danny Pearson wrote:
> Hi guys, I've got a 9010 with a couple of bad characters (the first two)
in
> the fluorescent display. Long shot I know but does anyone have a spare
> working display FS?
>
>
>
> Cheers,
>
>
>
> DanP
>
I should have a used spare display assembly that I can test and sell...

Is it the display or one of the driver ICs for the display that is at
fault? There is a display test in the TTL files - buried within the 9010
manual, that you can program in and run to have an idea of where the
problem may lay.

John :-#)#

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Received on Tue Jun 15 12:10:03 2010