Re: Followup: Plastic Moulding

From: Mark E Davidson <Burbs1_at_concentric.net>
Date: Tue Nov 10 1998 - 21:34:44 EST

Not so true! I need a Blaster stick to restore a Durmold blaster, so Id
be in

-- 
-=Mark=-
http://www.basementarcade.com/
Mark Jenison wrote:
> 
> Sorry about the offtopic followup,
> 
> The bad news is that apparently only Bill and I are interested in getting a
> Blaster joystick remade :-(.
> 
> The good news is that someone is sending me the right half of the joystick, so
> I will have a complete joystick handle!
> 
> I still need the thumb button and trigger (as does Bill, I believe), so I'm
> still going to borrow the complete joystick just to get these pieces remade,
> but it sounds like Tom Wisonski can help me with these parts (and he's local to
> me, so that's a big plus).
> 
> Anyway, those parts on the Monster Bash boardset (the 4015s)?  I also found a
> 4027 in one of the sockets.  According to BG Micro, 4027s are 4Kx1 250 n.s.
> Dynamic Rams, so I'll buy some from B.G. Micro.
> 
> Also, I scanned the ESB yoke sticker overlay.  I don't have an (external) web
> page, but I can put it on my friends web page this evening and e-mail a link to
> those interested.  Just in case I don't know what the hell I'm doing (which is
> likely), I'm sending it to Clay also.
> 
> That's all for now.
> 
> ----------------------------------------------------------------------
> Mark Jenison                       E-mail address: jenison@cig.mot.com
> Cellular Infrastructure Group      Motorola--Arlington Heights, IL
> ----------------------------------------------------------------------
Received on Tue Nov 10 20:34:09 1998

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:32:23 EDT