> > (This is the little board that fixes the "bowing" seen on a Wells
> Gardner
> > monitor when used in a Star Wars machine.)
>
> I assume this would also work in a dedicated Major Havoc that had a WG put
> into it, or is this for a specific problem in Star Wars ?
>
Yep, it should. I must confess that I haven't tried it recently. I decided
to just shoot for the 90% market and document the Star Wars mods.
(Basically it takes the un-amplified signals from the outputs of the digital
switches, +/- 15V, and then borrows the output line to put the new X
deflection signal out to the monitor.)
It would actually be easier on Major Havoc (at least the kit boards) since
they have those jumper wires that bring the pre-amplifier signals out to the
card edge for exactly this purpose. Only functional difference is that the
one I made allows for a variable amount of correction depending on personal
preference...
-Clay
Received on Mon Jul 19 15:53:21 1999
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:31:28 EDT