Re: My First 6100 / Problems

I checked all the connectors for continuity from the pins to the end of the
plugs. I resoldered all of the pins on the deflection PCB. Could I have
missed something?

Mike Singer wrote:

> > When I got my Tempest, the picture was only appearing in the upper left
> > corner of the screen and it would come and go. I figured "Deflection
> > Transistors". Ordered a kit from Bob Roberts. Now I have the top half
> > of the screen, but the bottom of the screen is being drawn in the
> > middle. I checked that all of the transistors are not shorted and I
> > used new mica and grease. Can anyone offer some suggestions?
>
> Cold solder joints on the connectors.
>
> Mike Singer
> Amusement Video Pinball

--
 =====================================================================
-=               Al Warner batlzone@cyberenet.net                    =-
-= Learn how to install a Cap Kit in your video game's monitor and   =-
-= see a whole lot more on my web page at:                           =-
-=               http://www.cyberenet.net/~batlzone                  =-
 =====================================================================