(no subject)

---------- Original Message ----------------------------------
From: "Williams,Ed" <EWILLIAMS@cerner.com>
Reply-To: vectorlist@lists.cc.utexas.edu
Date: Tue, 11 Jan 2000 09:45:55 -0600

>I bought a dusty old Space Wars with no picture but all the sounds.
>Does anyone know where I might find a troubleshooting flow diagram
>for a Space Wars monitor?

In the manual. It's pretty good. You can also use a later Cine
game manual as a reference (such as RO, AA, SC), although it's
not exactly the same.

>Further preliminary info: I have a hand-written schematic that
>says the blue and red wires should be piping in +-25.
>I am seeing +-60 there.

You should have +25 between pin 6 on J2 (on the monitor)
and ground (pin 12 on J2 on the monitor).

You should have -25 between pin 9 on J2 and ground on 12.

I don't think you have +/-60, that's 120v and the xformer
can't put that out. Plus your monitor would look like a G08
(i.e. on fire).

>
>Barring finding a troubleshooting guide, can anyone tell me
>what I should check/do next?

Check all the supply voltages, regulated and unregulated.

>
>Thanks for any responses.
>
>
Received on Tue Jan 11 11:33:02 2000