Due to the totally under-whelming response(0), I guess I won't be making
any of these panels...
John :-#(#
At 10:26 PM 2/3/2000 -0800, you wrote:
>I was considering making a bunch of Asteroid c/p's and was wondering if
>anyone might be interested in a couple. These would be just bent metal,
>possibly with the holes pre-drilled, that you then stick on the overlay. I
>have three Asteroids to restore at the shop, and might do the lazy route
>of cutting pop cans open to lay the thin metal down over the extra holes
>that were cut in the original panels, but thought if the price was right
>perhaps others might like this option. Say cost plus 15% for travel time
>for vector folk? The machine shop I use does very good work.
>
>John :-#)#
>
> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
> Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
> http://www.flippers.com
> "Old pinballers never die, they just flip out."
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
http://www.flippers.com
"Old pinballers never die, they just flip out."
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Fri Feb 4 23:22:41 2000
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:30:57 EDT