Re: Tempest Spot Killer On w/ LV2000 and Zanen 206.

check here:

http://www.gamearchive.com/video/manufacturer/atari/vector/html/monitor.html

or here:

http://plop.phys.cwru.edu/repairfaq/REPAIR/F_VAtari.html

Walt

----- Original Message -----
From: <SigmFSK@aol.com>
To: <vectorlist@synthcom.com>
Sent: Tuesday, May 02, 2000 2:20 PM
Subject: VECTOR: Tempest Spot Killer On w/ LV2000 and Zanen 206.

> Hi All. Got my new cocktail Tempest, and had a blast for 1/2 hour until
the
> monitor went out. Spot killer on. Right voltages on fuses. Chassis
> transistors not shorted - +/-26V.
>
> Installed LV2000, both LV2000 LEDs on. Spot killer still on. Turn up
> brightness, blue dot in center of screen.
>
> Per, www.amug.org/~necro/video/zanen206.html, installed the Zanen kit, and
> extra components (minus chassis transistors - and minus D100, D101, D102,
> D103 deflection board, and Q901, Q902 High Voltage parts (on backorder)).
>
> F700 blew on power up. Spot killer on. Replaced fuse, didn't blow again.
> Spot Killer still on. Turn up brightness, blue dot in center of screen.
> Rexamined all components; nothing obviously burned. F700 still good.
>
> Offer any ideas? Or wait and replace the D100-D103 and Q901, Q902 before
> going into serious troubleshooting?
> Thanks, Arthur.
>
> p.s. This is my first post; is this list described/referenced on the web;
> are previous messages available? Surely someone else has had this
problem;
> but I can't find a troubleshooting on F700 anywhere (sure, all the other
> fuses, but not F700).
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Tue May 2 16:30:55 2000