Hi All. Got my new cocktail Tempest, and had a blast for 1/2 hour until the
monitor went out. Spot killer on. Right voltages on fuses. Chassis
transistors not shorted - +/-26V.
Installed LV2000, both LV2000 LEDs on. Spot killer still on. Turn up
brightness, blue dot in center of screen.
Per, www.amug.org/~necro/video/zanen206.html, installed the Zanen kit, and
extra components (minus chassis transistors - and minus D100, D101, D102,
D103 deflection board, and Q901, Q902 High Voltage parts (on backorder)).
F700 blew on power up. Spot killer on. Replaced fuse, didn't blow again.
Spot Killer still on. Turn up brightness, blue dot in center of screen.
Rexamined all components; nothing obviously burned. F700 still good.
Offer any ideas? Or wait and replace the D100-D103 and Q901, Q902 before
going into serious troubleshooting?
Thanks, Arthur.
p.s. This is my first post; is this list described/referenced on the web;
are previous messages available? Surely someone else has had this problem;
but I can't find a troubleshooting on F700 anywhere (sure, all the other
fuses, but not F700).
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Tue May 2 15:35:53 2000
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:32:14 EDT