Re: XY deflection Proto

> Wait let me explain what I think this deflection design will do.
>
> In its basic state the way it is it will replace an amplifone
perfectly.
> My proto is actually running this circuit with only 2 transistor per side
so
> the final will be beefer. With a few simple resistor changes and an
increase
> in the supply -+40 or so it will replace the 6400.
>
> With 2 more power transistor on each side for safety, some resistor
> changes and +-60V it should replace the go8.
>
> Fred
>
> ----- Original Message -----
> From: "Jilayne Stanclif" <jstancliff@mchsi.com>
> To: <vectorlist@synthcom.com>
> Sent: Wednesday, June 12, 2002 12:55 AM
> Subject: Re: VECTOR: XY deflection Proto
>
>
> > If you increase the voltage and made some tweeks it should be really
close
> > if not the same as the Go8.
> >
> > Fred
> >
> >
> > ----- Original Message -----
> > From: "Joe Magiera" <joemagiera@ameritech.net>
> > To: <vectorlist@synthcom.com>
> > Sent: Wednesday, June 12, 2002 12:34 AM
> > Subject: Re: VECTOR: XY deflection Proto
> >
> >
> > > So are you saying your replacement will match performance/quality of a
> > > WG6401?
> > >
> > > Joe
> > > joemagiera@ameritech.net
> > >
> > > ----- Original Message -----
> > > From: "Jilayne Stanclif" <jstancliff@mchsi.com>
> > > To: <vectorlist@synthcom.com>
> > > Sent: Tuesday, June 11, 2002 10:11 PM
> > > Subject: VECTOR: XY deflection Proto
> > >
> > >
> > > > Allright this is what I think will work the best as far as
deflection.
> > > This
> > > > is the design I am using on my Proto right now less the 2 extra
> > > transistors
> > > > on the output.
> > > > Nothing special here pretty much a copy of the 6400 Mark Spath can
> tell
> > > you
> > > > that ;) ,
> > > > but with cheap transistors. The tip35c and 36c can go up to 100V so
if
> > you
> > > > kept adding them, decrease the yoke windings and increase the
voltage
> > you
> > > > could probably get what ever slew you wanted. I messed up on the 2 3
> ohm
> > > 10
> > > > watt resistors scratch that. It needs 2 10 watt .75 or close
resistors
> > in
> > > > series. I made more heat putting them the way they are now. The
> > resistors
> > > > not marked are the one's that would have to be adjusted for higher
> > > voltages.
> > > >
> > > > Fred
> > > >
> > > >
> > > >
> > > > http://home.mchsi.com/~jstancliff/wsb/media/26501/site1056_t.jpg.
> > > >
> > >
> >
>
> --------------------------------------------------------------------------
> > > -
> > > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
> in
> > > the
> > > > ** message body to vectorlist-request@synthcom.com. Please direct
> other
> > > > ** questions, comments, or problems to
vectorlist-owner@synthcom.com.
> > >
> >
>
> --------------------------------------------------------------------------
> > -
> > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
in
> > the
> > > ** message body to vectorlist-request@synthcom.com. Please direct
other
> > > ** questions, comments, or problems to vectorlist-owner@synthcom.com.
> >
>
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Tue Jun 11 23:17:05 2002