Re: WG6102 display help needed!

Check capacitor C98 for damage or disconnect from the board.

I *just* fixed very similar symptoms on a Battlezone. Different part and
location, but same function in circuit.

on 15 07 01 19.15, Eric Johnson at ericjohn@myrealbox.com wrote:

> I'm having problems with a newly acquired WG6102 monitor.
> I'm hopting someone here can shed some light on what is
> going on with this monitor.
>
> The monitor works, but the vectors do not line up very
> well, and the picture is very shaky. Every couple of
> seconds, the picture collapses to the right of the screen,
> and a bright spot appears in the center. As the picture
> collapses, you can hear the game power supply start to buzz
> as a result of increased current draw from the monitor.
> About 1/2 second after the picture collapses, it comes
> back. I included some video clips of the montor
> exhibiting this problem:
>
> ASF format:
>
> http://216.15.60.178/wg6102.rm
>
> RealVideo Format:
>
> http://216.15.60.178/wg6102.asf
>
> The monitor exhibits the same behavior even after
> installing a LV2000, and replacing C901, C902 and C905
> Any ideas what is going on?
>
> Any help would be greatly appreciated.
>
> ^^Eric
>
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
>

-- 
Anthony Ramos________
600 SE 39th Ave., # 3  \__ aramos@ele-mental.org .. aramos@hyperreal.org
Portland, OR 97214      \___ information design .. multimedia production
(503) 236-6303           \____________interactive art .. image synthesis
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.