Re: Tempest help

From: John Robertson <jrr_at_flippers.com>
Date: Fri Aug 24 2001 - 01:15:49 EDT

It looks to me like you are only having 1/4 of your screen working.
Correct? If so, then you have a problem with your -27VDC supply. I'd start
there. Check the voltages according to the schematic...

John :-#)#

At 06:55 PM 23/08/2001, you wrote:

>Hello, i have posted photos of my tempest on my web site. If anyone has any
>idea what may be going on with this thing please let me know. I have
>installed the cap kit, before that it was just drawing spots. I have gone
>over all the solder points and they are all solid. Thanks! -Derek
>
>http://etherealdesign.com/tempest/
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Thu Aug 23 22:16:04 2001

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:33:34 EDT