At 02:47 AM 8/24/2001 -0500, Mark Shostak wrote:
>Reb,
>
>If you have trouble resetting the breakers, then I would replace them,
>otherwise, I would suggest you start with the monitor itself.
>
>Check for shorted output trani's, shorted drivers, etc.
>Of course, that's just the starting point, so don't stop there or you may
>just end
>up with more shorted outputs and drivers.
>
>Most likely, at least your initial problem(s) is/are in that area.
I can reset them without a problem. I was wondering about that FAQ. The
author didn't even know who Littlefuse is. Thanks for the advice. Stay tuned
for the next installment in my saga...
reb
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Fri Aug 24 07:40:38 2001
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:33:34 EDT