Re: WG 6100 cap replacements

From: John Robertson <jrr_at_flippers.com>
Date: Tue Dec 04 2001 - 21:13:44 EST

I agree with Bob's posting, these two caps rarely fail, and they are
difficult to remove without causing some damage to their rivets as well.

Don't go looking for trouble. You have a vector game. (Are those statements
mutually exclusive or what? ;-)

John :-#)#

At 01:31 AM 12/04/01, you wrote:
>...
>
>The two main board 4700 uF caps that Zanen doesn't replace will probably
>never need replacement because they were heavy enough to handle their
>ripple current. Unless they are actually causing you grief you might as
>well leave them alone.
>
>
>
> > David Shoemaker wrote:
> >
>...
> >
> > The Zanen kit does not replace ANY caps on the power supply board. At
> > minimum I want to replace the two filter caps
> >
> > C100 4700 uF @ 50V (AE)
> > C101 4700 uF @ 50V (AE)
> >
>...
> >
> > David

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Tue Dec 4 18:30:18 2001

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:33:46 EDT