Re: TECH: Battlezone Audio Problems

One Battlezone boards I have repaired before, the 4066 analog switch
IC's have often been faulty in the sound section on the Aux Board,
I think all the major sound faults I have seen have all been fixed by
replacing dead 4066's and I think a 555 timer once...

Anyway I hope this helps,
Cheers,

Marc

----- Original Message -----
From: "Commander Dave" <cmdr-dave@spamcop.net>
To: <vectorlist@synthcom.com>
Sent: Wednesday, July 03, 2002 8:39 AM
Subject: Re: VECTOR: TECH: Battlezone Audio Problems

> If the POKEY is on the main board, that shouldn't be the problem as I can
> change out the AUX Board (the top board) and everything works fine. I'll
> keep at it and post what I find for posterity.
>
> Thanks,
> -Commander Dave
> ----- Original Message -----
> From: "Neil Bradley" <nb@synthcom.com>
> To: <vectorlist@synthcom.com>
> Sent: Tuesday, July 02, 2002 14:32 PM
> Subject: Re: VECTOR: TECH: Battlezone Audio Problems
>
>
> > > Thanks, but I am pretty sure I replaced this chip with the good one
> > > with no improvement. I don't have the board here at the moment, but I
> > > have already swapped all the socketed chips - of which I think one was
> > > the POKEY. Being new to working on Vector games, can someone tell me
> > > what position on the AUX BD the POKEY is on? I guess I need to check
> > > the socket to be sure it is getting all the connections, however.
> >
> > The Pokey is on the main Battlezone board. It's one of the (I think) two
> > 40 pin chips.
> >
> > -->Neil
> >
> > --------------------------------------------------------------------------
> -----
> > Neil Bradley What are burger lovers saying
> > Synthcom Systems, Inc. about the new BK Back Porch Griller?
> > ICQ #29402898 "It tastes like it came off the back porch." - Me
> >
> > --------------------------------------------------------------------------
> -
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to vectorlist-owner@synthcom.com.
> >
>
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to vectorlist-owner@synthcom.com.
>
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Tue Jul 2 17:37:23 2002