Re: Who fixes Cinematronics boards?

Matt,

A scan would be great. I've tried opening the postscript layout files on
Spies, but I can't find a Mac postscript viewer that doesn't abort with
an error.

Cheers
Paul
On Tuesday, October 15, 2002, at 04:41 AM, Matt Rossiter wrote:

> I use the Kurz Kasch test fixture with a Signature Analyzer. If anyone
> is
> interested in having me scan in an image of the exorsizor cards, I'd be
> happy to do so. I don't think they'd be that hard to reproduce.
>
> I've had great success using it. I once fixed a rip-off board in about
> an
> hour one time. Other games have taken me a couple days.
>
>
> Matt
>
>
>
> ----- Original Message -----
> From: "Paul Sommers" <rgvac_macman@froggy.com.au>
> To: <vectorlist@synthcom.com>
> Sent: Monday, October 14, 2002 12:37 AM
> Subject: Re: VECTOR: Who fixes Cinematronics boards?
>
>
>> I now have a signature Analyzer and I was going to try and build an
>> Exorcisor with the schematics on Spies. Anyone done this? Any comments?
>> Doesn't look too hard, but again I'm probably missing something.
>>
>> Cheers
>> MacMan
>>
>> On Monday, October 14, 2002, at 06:47 AM, Gregg Woodcock wrote:
>>
>>>
>>> ----- Original Message -----
>>> From: "John Robertson" <jrr@flippers.com>
>>> To: <vectorlist@synthcom.com>
>>> Sent: Wednesday, October 02, 2002 1:33 AM
>>> Subject: VECTOR: Who fixes Cinematronics boards?
>>>
>>>
>>>> I'm seeing a few posts on RGVAC about folks needing these repaired. I
>>> don't
>>>> have the signature fixture so I'm not attempting to fix them at this
>>>> time.
>>>> Anyone know who does fix these turkeys?
>>>
>>> I have had significant success by using logic comparators. There are
>>> several chips which do not register properly with a logic comparator
>>> but now
>>> I know which ones they are and how to read them. I would be willing
>>> to
>>> repair PCBs for people BUT I have a huge backlog (6 -12 months of
>>> work)
>>> AND
>>> I need to make enough room in my garage to fit another machine to use
>>> as a
>>> test bed. If that doesn't scare you off, email me with your situation
>>> and
>>> I'll get back to you when I am dug out and ready to take on new
>>> repairs...
>>>
>>
>> --------------------------------------------------------------------------
> -
>>> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
>>> in
>>> the
>>> ** message body to vectorlist-request@synthcom.com. Please direct
>>> other
>>> ** questions, comments, or problems to vectorlist-owner@synthcom.com.
>>>
>>
>> --------------------------------------------------------------------------
> -
>> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> the
>> ** message body to vectorlist-request@synthcom.com. Please direct other
>> ** questions, comments, or problems to vectorlist-owner@synthcom.com.
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to vectorlist-owner@synthcom.com.
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Mon Oct 14 12:38:52 2002